OVERVIEW

In recent years Pieffe has decided to enhance its range of cast and pressed elastomers with a vast range of customized articles made of techno-plastic and composite materials. Thereby meeting the growing market demand for products with exceptional physical-mechanical features.

Thanks to the ongoing experience acquired in over 60 years of activity Pieffe has succeeded in combining together a truly varied range of materials thereby obtaining impeccable performance levels never before seen on the market.

PRODUCTS

Serie SUSTAKE

Techno-plastic materials belonging to the family of highly crystalline polyamides, boasting excellent mechanical properties and a level of impact and wear resistance that is higher than average.

Thanks to their versatility (extrusion, injection, casting) it is possible to obtain semi-finished items or items of complex geometry, as well as the production of prototypes (single pieces) or serial production.

DOWNLOAD .PDF :

SUSTAKE 6 GSUSTAKE 6 GNSUSTAKE 6 ATLSUSTAKE 6SUSTAKE 6 NSUSTAKE 66SUSTAKE 66 NSUSTAKE 6 GF30

Serie PURPEEK

This plastic material is suitable for use in extreme temperature conditions (up to +310 °C), whilst maintaining an impeccable level of mechanical resistance and making it suitable for use with chemical products.
In special formulations it is suitable for use in contact with food.

 

DOWNLOAD .PDF :

PURPEEK

Serie PURBAKE

Laminate made of Bakelite treated fabric, it boasts excellent mechanical features making it suitable for the production of limited quantities of gearing, slide guides and plates.
Normally used in the mechanical steel-iron processing sector. It is also suited to the production of special sections of complex form, in even large dimensions.

 

DOWNLOAD .PDF :

PURBAKEPAPERBAKEPURBAKE ATLPAPERBAKE AT

Serie POLITAKE

This product is widely used in the food sector in which a limited friction coefficient is necessary, it also boasts excellent stretching potential to breaking point and has non-stick surfaces.
Available in various colours and densities according to the intended use.

 

DOWNLOAD .PDF :

POLITAKE 300POLITAKE 500POLITAKE 1000

Serie PVDAKE

PVDAKE is suitable for use in a whole variety of applications. It can be supplied in the form of a semi-finished item (plates, pipes, rods, or film) or in the form of customized finished items.
It is heat-formable, heat-welding and can be easily glued, it offers the greatest acid resistance and is almost totally inflammable.

 

DOWNLOAD .PDF :

PVDAKE R

Serie PETBAKE 500

This product has good mechanical properties in general, foremost of which are its self-extinguishing property, its excellent dimensional stability, the very low expansion coefficient and excellent resistance to atmospheric agents.

 

DOWNLOAD .PDF :

PETBAKE 500PETBAKE 500FT

Serie FLUORTAKE

Techno-plastic material of the highest quality, with a very low friction coefficient (the lowest of its kind in the plastic materials field), with excellent anti-adhesive properties and excellent resistance to chemical agents..
Exceptional stability and very low temperatures (up to – 200 °C) and to high temperatures (up to + 200 °C continuously, with peaks of + 300 °C).

 

DOWNLOAD .PDF :

FLUORTAKE

Serie LIGNOTAKE

Product obtained from strips of choice wood, that are then coated or saturated in a vacuum using synthetic resins and pressed at high temperature.
LIGNOTAKE boasts a high resistance to mechanical loads and to abrasion. It also has good electrical isolation properties and a low degree of thermal conductivity.
resistant to both low and high temperatures, with a low specific weight.

 

DOWNLOAD .PDF :

LIGNOTAKE

Serie LAMITAKE

Thermoplastic material that combines hardness with dimensional stability and a good degree of impact resistance.
It also has a good degree of mechanical resistance and good dielectric properties.
Machining potential in terms of shaving removal is excellent.

 

DOWNLOAD .PDF :

LAMITAKE 50LAMITAKE 60LAMITAKE 60 N

Serie EPODAKE

Laminated product based on glass fibre and modified epoxy resins. It has good dielectric and mechanical properties even in extreme environmental conditions. A self-extinguishing version also available (Class V=0), suited to use at temperatures of over 150 °C.
Good mechanical machining potential.

 

DOWNLOAD .PDF :

EPODAKE 3EPODAKE 5EPODAKE 11EPODAKE 10

Serie THERMOTAKE

A composite, laminated material, especially used for thermal insulation (resistance of up to + 500 °C / + 900 °C), with low fume emissions and which is also halogen free.
Ideal for static applications, it is highly resistant to heavy loads. i.
It is also stable on contact with hydrocarbons and chemical elements in general.

 

DOWNLOAD .PDF :

THERMOTAKE 220

materie_main